Cornet ED88TPlus2 Tri-Mode
Cell towers | Smart meters | WiFi signal strength meter | Microwave ovens | Power lines | Transformers | Home appliances

Cornet ED88TPlus2---- $229.⁹⁰ $219.⁹⁰ (Worldwide Free Shipping)
A Tri-mode meter for up to 8GHz/10KHz

(0.1-8GHz) RF/LF Electrosmog field strength power meter with build-in Gauss meter and E-Field function (Tri mode) with sound output and USB PC connection

  Download manual

Download USB Driver

Download PC software

  Applications:

• Electromagnetic field strength measurement. both low frequency and high frequency. 
• Mobile phone base station radiation power Density safety measurement. 
• Telecommunications(CW,TDMA,GSM,DECT). 
• RF safety measurement. 
• RF power measurement for transmitters. 
• Wireless LAN (Wi-Fi) detection, installations. 
• Smart meters 
• Spy camera, wireless bug finder. 
• Cellular/cordless phone radiation safety level. 
• Microwave oven leakage detection. 
• Electric and magnetic field measurement. 
• E-field mode: measured ELF electric field strength is shown on the digital LCD display with V/m. 
• Personal living environment EMF safety.  
• Data logging via USB to PC connection software. 

Specs:

• Tri operation mode: RF power meter mode, LF Gauss meter mode and LF E-Field mode. 
• RF Frequecy range: 100MHz to 8GHz (RF meter), (-60dBm to +5dBm),(0.5uw/m2 to 1.8w/m2), (14mv/m to 26.2v/m). 
• Shows the broadcast frequency (100MHz - 2.7GHz) range. 
• LF1: 50Hz to 10KHz (0.1uT to 60uT)/(1mG to 600mG). 
• LF2: 50Hz to 1KHz (0.01uT to 1uT)/(0.1mG to 10mG). 
• E-field bandwidth of 50Hz-50KHz with sensitivity of 10v/m to 1000v/m.
• Peak power density measurement 1.5uW/m2 to 0.58W/m2. 
• LCD Backlight: 15 seconds auto-off and manual on/off control. 
• LCD Histogram and bar display to display power density level. 
• Sampling rate: 10,000/sec. Display update rate: 2/sec. 
• Error rate: +/- 3.5dBm, LF: 20%, E-field: 25%. 
• Analog RF(AM,FM) and Digital burst RF(GSM,TDMA,CDMA,DECT, ZigBee, Bluetooth, UWB, WiFi, WiMAX 2.4GHz, 3.6GHz, 5.8GHz). 
• Max and Hold function, mW/m², V/m, dBm, mG, uT. 
• Average, Sound output, audio Alarm function. Calibration correction.
• Earphone port.
• Volume control.
• USB connection for data communiation and power supply.
• Audio Sound ON/OFF control, programmable Alarm
  triggering level. 
• Accurate, easy to use device, excellent for personal Electrosmog exposure evaluation for living environment, such as close by Mobile phone base station. 
• Build-in Sensing Antenna. 
• Small, compact handheld design, 69mmX110mm. 
• Battery operated (9V DC) 
• Constant power option via USB.